Thursday 14 April 2016

The next variants development of Butcher's - Focke-Wulf Fw190. Part 3. Compiled by German Dzib

High-altitude developments

Tank started looking at ways to address the altitude performance problem early in the program. In 1941, he proposed a number of versions featuring new powerplants, and he suggested using turbochargers in place of superchargers. Three such installations were outlined

Fw 190 V12
(an A-0) would be outfitted with many of the elements which eventually led to the B series.

Fw 190 V13
The Fw 190C V18 prototype, with large ventral "pouch" fairing for
the turbocharger installation and broader-chord vertical fin/rudder.
(W.Nr. 0036) first C-series prototype

Fw 190 V15
(W.Nr. 0036) second C-series prototype

Fw 190 V16
(W.Nr. 0036) third C-series prototype

Fw 190 V18
(W.Nr. 0036) fourth C-series prototype

Fw 190 B-0
With a turbocharged BMW 801

Fw 190 B-1
This aircraft was similar to the B-0, but had slightly different armament. In its initial layout, the B-1 was to be fitted with four 7.92 mm (.312 in) MG 17s and two 20 mm MG-FFs. One was fitted with two MG 17s, two 20 mm MG 151s and two 20 mm MG-FFs. After the completion of W.Nr. 811, no further Fw 190 B models were ordered.



Fw 190 C
With a turbocharged Daimler-Benz DB 603, the tail of the aircraft had to be lengthened in order to maintain the desired centre of gravity. Four additional prototypes based on the V18/U1 followed: V29, V30, V32 and V33.

Fw 190 D
The Fw 190 D (nicknamed Dora; or Long-Nose Dora ("Langnasen-Dora") was intended as the high-altitude performance version of the A-series.

Fw 190 D-0
The first D-0 prototype was completed in October 1942 with a supercharged Junkers Jumo 213 including a pressurized cockpit and other features making them more suitable for high-altitude work. (35)

Fw 190 D-1
Initial production

Fw 190 D-2
Initial production

Fw 190 D-9
The D-9 series was rarely used against heavy-bomber raids, as the circumstances of the war in late 1944 meant that fighter-versus-fighter combat and ground attack missions took priority. (37)(38)(39)
This captured Fw 190 D-9 appears to be a late production aircraft built by Fieseler at Kassel. It has a late style canopy; the horizontal black stripe with white outline shows that this was a II. Gruppe aircraft.

An early production Fw 190 D-9 at the Cottbus plant. Note the early canopy and redesigned, simplified centerline rack carrying a 300 l drop tank. (36)

Fw 190 D-11
Fitted with the up-rated Jumo 213F series engine similar to the Jumo 213E used in the Ta-152 H series but minus the intercooler. Two 30 mm (1.18 in) MK 108 cannons were installed in the outer wings to complement the 20 mm MG 151s in the inboard positions. (40) 

Fw 190 D-12
Similar to the D-11, but featured the 30 mm (1.18 in) MK 108 cannon in a Motorkanone installation firing through the propeller hub.

Fw 190 D-13
The D-13 would be fitted with a 20 mm MG 151/20 motor cannon.
Fw 190 D-13/R11, Champlin Fighter Museum, Phoenix, Arizona (c.1995)

Ground attack versions

Fw 190 F
The Fw 190F configuration was originally tested in a Fw 190 A-0/U4, starting in May 1942, fitted with centre-line and wing-mounted bomb racks.

Fw 190 F-1
Early converted aircraft designated A-4/U3

Fw 190 F-2
Renamed A-5/U3s, of which 270 were built according to Focke-Wulf production logs and Ministry of Aviation acceptance reports.

Fw 190 F-2
Based on the Fw 190 A-5/U17, which was outfitted with a centreline mounted ETC 501 bomb rack, and in the Fw 190 F-3/R1, with two ETC 50 bomb racks under each wing. 

Fw 190 F-3
The F-3 could carry a 66-Imp gal (300 liter) drop tank. A total of 432 Fw 190 F-3s were built. (41)

Fw 190 F-4 to Fw 190 F-7 — designations used for projects.

Fw 190 F-8
The A-8 model re-designated, having a slightly modified injector on the compressor which allowed for increased performance at lower altitudes for several minutes. Armament of the Fw 190 F-8 was two 20 mm MG 151/20 cannon in the wing roots and two 13 mm (.51 in) MG 131 machine guns above the engine.
Fw 190 D-13/R11, Champlin Fighter Museum, Phoenix, Arizona (c.1995)

Fw 190 F-8/U1 — long range JaBo, fitted with underwing V.Mtt-Schloß shackles to hold two 300 L (80 US gal) fuel tanks. ETC 503 bomb racks were also fitted, allowing the Fw 190 F-8/U1 to carry one SC 250 bomb under each wing and one SC 250 bomb on the centerline.

Fw 190 F-8/U2 — torpedo bomber was fitted with an ETC 503 bomb rack under each wing and a centre-line mounted ETC 504. The U2 was also equipped with the TSA 2 A weapons sighting system that improved the U2's ability to attack seaborne targets with a 700 kg (1,500 lb) BT 700. (41)

Fw 190 F-8/U3 — heavy torpedo bomber was outfitted with an ETC 502, which allowed it to carry one BT-1400 heavy torpedo (1,400 kg (3,100 lb)). Owing to the size of the torpedo, the U3's tail gear needed to be lengthened. The U3 also was fitted with the 2,000 PS BMW 801S engine, and the tail from the Ta 152.

Fw 190 F-8/U4 — created as a night fighter, was equipped with flame dampers on the exhaust and various electrical systems such as the FuG 101 radio altimeter, the PKS 12 automatic pilot, and the TSA 2 A sighting system. Weapons fitted ranged from torpedoes to bombs however, the U4 was fitted with only two MG 151/20 cannon as fixed armament.

Fw 190 F-8/R3 — under wing mounted two 30mm MK 103 cannon.

Fw 190 F-9 — based on the Fw 190 A-9, but with the new Ta 152 tail unit, a new bulged canopy as fitted to late-build A-9s, and four ETC 50 or ETC 70 bomb racks under the wings. According to Ministry of Aviation acceptance reports, 147 F-9s were built in January 1945, and perhaps several hundred more from February to May 1945. (Data for these months is missing and probably lost.)

Fw 190 G —  was built as a long-range attack aircraft (Jagdbomber mit vergrösserter Reichweite — abbreviated JaBo Rei). Following the success of the Fw 190 F as a Schlachtflugzeug (close support aircraft), both the Luftwaffe and Focke-Wulf began investigating ways of extending the range of the Fw 190 F. Approximately 1,300 Fw 190 Gs of all variants were new built.

Fw 190 G-1 — was based on the A-4/U8 JaBo Rei's. Initial testing found that if all but two wing root mounted 20 mm MG 151 cannons (with reduced ammunition load) were removed, the Fw 190 G-1 (as it was now called) could carry a 250 kg (550 lb) or 500 kg (1,100 lb) bomb on the centreline and, via an ETC 250 rack, up to a 250 kg (550 lb) bomb under each wing.
Fw 190 G-1 showing the ETC 250 bomb rack, carrying a 250 kg (550 lb) bomb, and the underwing drop tanks on VTr-Ju 87 mounts.

Fw 190 G-2 — was based on the Fw 190 A-5/U8 aircraft, similar to the G-1; the underwing drop tank racks were replaced with the much simpler V.Mtt-Schloß fittings, to allow for a number of underwing configurations.

Fw 190 G-3 — was based on A-6 with all but the two wing root mounted MG 151 cannons removed. The new V.Fw. Trg bombracks, however, allowed the G-3 to simultaneously carry fuel tanks and bomb loads

Fw 190 G-3/R1 — The G-3/R1 replaced the V.Fw. Trg racks with WB 151/20 cannon pods, giving the G-3/R1 a total of six 20 mm cannon.

Fw 190 G-3/R5 —  was similar to the R1, but the V.Fw. Trg racks were removed, and two ETC 50 racks per wing were added.

Fw 190 G-8 — was based on the Fw 190 A-8, using the same "bubble" canopy as the F-8 and fitted with underwing ETC 503 racks that could carry either bombs or drop tanks.

Fw 190 G-8/R4 — The G-8/R4 kit was a planned refit for the GM 1 engine boost system, but never made it into production.

Fw 190 G-8/R5 — The G-8/R5 kit replaced the ETC 503 racks with two ETC 50 or 71 racks.

No comments:

Post a Comment